28 04, 2021

A Very Practical Tank Design

By |2021-04-28T09:13:19+10:00April 28th, 2021|Categories: Blogs, Utilities and Infrastructure|Tags: , , , , , , |0 Comments

Vortex Group operates in some of the harshest environments across the country and needs its equipment to perform regardless the conditions. Working in collaboration to design a resilient tank [...]

21 04, 2021

Practical Engineering Provides Another Speedy Design to Meet Client Delivery

By |2021-04-21T08:51:22+10:00April 21st, 2021|Categories: Blogs, Industrial|Tags: , , , , , , , , , |0 Comments

Mud Cube Skid Designed in One Week Practical Engineering recently partnered with sludge dewatering specialists Conhur to design, certify and draft a new Mud Cube Skid. It sounds straight [...]

20 01, 2021

Backwash Drain Line Air Vent Design and Construct

By |2021-02-10T11:37:55+10:00January 20th, 2021|Categories: Blogs, Utilities and Infrastructure|Tags: , , , , , , , , |0 Comments

Practical Engineering Australia was recently engaged by Seqwater to undertake an investigation and provide a solution for preventing an air pocket evolving in the backwash drain line during a [...]

2 11, 2020

Envelope Spreader Replacement

By |2020-11-02T01:06:02+10:00November 2nd, 2020|Categories: Blogs, Industrial|Tags: , , , , , , , , , , , , |0 Comments

Practical Engineering were engaged by Black Rubber to repair and replace the overhead rails inside and outside of the autoclave to allow vulcanisation of the tyres in their Michelin [...]

28 10, 2020

Practical Engineering Mining Industry Solution

By |2020-10-28T03:35:55+10:00October 28th, 2020|Categories: Blogs, Industrial|Tags: , , , , , , , , |0 Comments

Underground Loader Vehicle Stop Block Practical Engineering Australia has a history of providing engineered solutions for the Mining Industry. PEA has recently been working with VVA Engineering on design [...]

21 10, 2020

Project Deep Dive – 610 bar Hydrostatic Testing Vessel

By |2020-10-21T01:33:18+10:00October 21st, 2020|Categories: Industrial, News|Tags: , , , , , , , , , , , , |0 Comments

Do we know more about the surface of Mars than the underwater surfaces on Earth? It’s often quipped that this is the case as sources suggest that over 80% [...]

27 09, 2020

Elevated Walkway to Passenger Boarding Bridge Edge Protection Barrier

By |2020-09-27T23:51:23+10:00September 27th, 2020|Categories: News, Utilities and Infrastructure|Tags: , , , , , , , , |0 Comments

Practical Engineering Australia was recently engaged by Port of Brisbane Pty Ltd to design a temporary edge protection system to AS/NZS 4994.1:2009 - Temporary edge protection, for the new International [...]

23 06, 2020

Practical Engineering Fuel Gas Heater Pressure Vessels

By |2020-09-08T03:50:44+10:00June 23rd, 2020|Categories: Energy and Resources, News|Tags: , , , , , , , , , |0 Comments

Gas pressure vessels are generally designed to stir, mix and hold gas at a substantially different pressure than that of the surrounding atmosphere. As a result of this pressure, [...]

23 06, 2020

Practical Engineering Testing and Certification in the Oil and Gas Industry

By |2020-09-17T00:50:08+10:00June 23rd, 2020|Categories: Energy and Resources, News|Tags: , , , , , , , , , , , , |0 Comments

Testing and certification is a key part of keeping work sites, staff members and contractors safe whilst operating on Australia’s oil and gas fields. The ‘golden rule’ of testing [...]

23 06, 2020

Gas Flaring Systems

By |2020-09-17T00:51:56+10:00June 23rd, 2020|Categories: Energy and Resources, News|Tags: , , , , , , , , |0 Comments

Practical Engineering has developed a range of flaring systems to cater to the drilling and mining industries. The systems range from mud-gas separating Flare Tanks to gas venting Blooie [...]

Go to Top